Nowadays, the use of antiseptic wood in home decoration has become more and more frequent. For example, for wooden floors, the indicator of their hardware is that they must be waterproof, moisture-proof and anti-corrosion, so that the wooden floor will be durable in the process of use. So now there is also a kind of antiseptic wood on the market, and the floor made of this wood can do a good job of anti-corrosion. However, I believe that many friends do not have a special understanding of the installation process of anti-corrosion wood, so in the following content, I will give you a detailed explanation.
1、 What is the installation process of anti-corrosion wood?
1. Preparation of anti-corrosion wood floor before construction
First of all, the construction site must be cleaned up. The construction quality of the ground must meet the design requirements. In addition, waterproof, moisture and air insulation treatment must be done well. The ground to be installed should be fixed with screws and galvanized corner pieces to fix the keel.
2. Laying of floor
The construction of anti-corrosion wood floor needs to be leveled on site. The keel is leveled on the ground. There is no topsoil, obvious protrusion and construction waste on the surface, and the flatness of the ground can be detected with instruments. The leveling of the ground must use keel to link it into a frame or trellis structure, and then lay anti-corrosion wood.
3. Treatment of wood structure base course
During the design and construction, it is necessary to fully maintain the air circulation between the anti-corrosion wood and the ground, which can further extend the service life of the wood structure base.
4. Anti corrosion wood installation
Later, when making and installing the anti-corrosion wood, a 0.2-1cm gap should be left between the anti-corrosion wood to avoid water accumulation in rainy days and the expansion of the anti-corrosion wood. The thickness of the anti-corrosion wood should be more than 50mm or more than 90mm. In order to reduce cracking, a groove can be cut on the back.
2、 What are the characteristics of antiseptic wood?
1. Corrosion resistance
Anticorrosive wood has a good anti-corrosion performance, and the good performance of anti-corrosion wood is that of anti-corrosion. After scientific high-pressure treatment, the anti-corrosion performance of CCA is completely integrated into the fiber of wood, and then add that the tree core is actually composed of wood glue oil and other substances, and it itself will contain a certain anti-corrosion performance. Therefore, the overall anti-corrosion performance of anti-corrosion wood, whether sapwood or tree core, is very good.
Anticorrosive wood is more practical than ordinary wood. Anticorrosive wood has all the advantages of ordinary wood. The texture of the appearance is very clear and natural. The color of the wood is varied, and the texture is good. In addition, it has a preservative property that ordinary wood does not have. It can be applied to all kinds of bad weather, and it can also prevent borers.
3. Burst resistance
The characteristics of antiseptic wood are irreplaceable. Some wood products will spray tung oil on their surfaces in order to have antiseptic properties. At this time, there will be a certain amount of antiseptic on the surface, but the interior of the wood will not have antiseptic effects. Therefore, such wood products will still have corrosion and fracture after a long time of use, but the performance of the antiseptic wood is very good.
The above is what Xiaobian explained to you about the installation process of anti-corrosion wood. I believe you have a certain understanding of the installation process of anti-corrosion wood. At the same time, anti-corrosion wood also has many characteristics, so it is a very good choice to use it in home decoration.
The above is a detailed introduction of Shandong antiseptic wood. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.wpandro.com